Downloads

Download the latest version used with all Cobolt lasers:

CoboltMonitor-6.1.3.2

[Exceptions are:
CoboltMonitor 6.0.8.0 Software for Cobolt Tor XS
CoboltMonitor 6.0.7.0 Software for Cobolt Skyra]

CoboltMonitor-6.1.3.2 is the GUI for all new Cobolt lasers (released October 2023) replacing CoboltMonitor-6.1.0.0. This latest version is compatible with all Cobolt laser models and replaces previously published versions (however if you experience any issues with an older model, try downloading 6.0.7.0 or older – see table below).

• The GUI supports simultaneous connection and monitoring of multiple lasers, configured for either RS232 or USB2.0 communication.
• The GUI automatically searches for all Cobolt lasers connected to the computer.
• Cobolt Monitor™ 6.1.3.2 requires the .NET 4.0 framework to be installed on the computer (standard on Windows 8 and later).  The .NET 4.0 framework is available for the majority of Windows releases, including: Windows XP (SP3), Windows Vista (SP1), Windows 7 (SP1), Windows 8, Windows 8.1, and Windows 10.

NOTE: If you have an older Cobolt laser model and you experience problems to connect to it with Cobolt Monitor 6.1.3.2, please contact your Cobolt sales engineer or distributor with your laser serial number for advice about which version of Cobolt Monitor software to use (see list below).

See laser series manuals for further instructions regarding software usage.

To connect a Cobolt laser configured for USB communication:
The USB Driver for Cobolt lasers is typically installed automatically on Windows 10 computers.
If using Windows versions before Windows 10, it may be necessary to install the USB Driver below.

To connect a Cobolt laser configured for RS-232 communication with an RS-232 to USB adaptor:
Do not install the Cobolt USB Driver. It is necessary that the RS-232 to USB adaptor driver is installed on the computer. Visit the website of the adaptor manufacturer to download their driver if this does not install automatically.

Driver for USB communication (USB 2.0 required or USB hub)

Driver for USB communication with C-FLEX laser combiners

Instructions for installing the Cobolt USB Laser Device Driver on a Windows 7 or Windows XP Machine
Instructions for installing the Cobolt USB Laser Device Driver on a Windows 8 Machine

To integrate the Cobolt lasers into LabView environment, please download the driver packages below.
LabView (Version 2012)
LabView (Version 2021)

Integration of Cobolt lasers into Micromanager software

An official Micromanager driver is available for Cobolt 06-01 lasers and for Cobolt Skyra. Please search for and install the “CoboltOfficial” driver from the Micromanager library.

If you experience any difficulties with your Micromanager integration, please contact us at: info.se@hubner-photonics.com 

Note: If you are running previous or alternate versions of a Cobolt laser driver in Micromanager:
We support and appreciate the creativity, hard work, and innovation of researchers using our lasers in the Micromanager community. However, caution must be taken to ensure that compliance with laser safety regulations is strictly maintained during operation of CE or CDRH labeled products as stand-alone devices in laboratory settings. Other Micromanager drivers are available for Cobolt lasers which are not written by Cobolt. Micromanager is an open source software and Cobolt is not liable for independently published drivers.

Cobolt is on GitHub!

“To get started using a Cobolt laser with a program written C++ or Python, please refer to our example codes here: https://github.com/cobolt-lasers

The example codes are intended to provide a sample of how to communicate with Cobolt lasers via C++ or Python languages. They are compatible for all Cobolt lasers and cross-platform (ex: Windows, Linux).”